- Stock: Sold Out
- Model: NSMF203
Metal Coat protects your vehicle's body shell from environmental damages. It creates a nano coating layer that filters UV and protects against acid rains, bird droppings, residue from water run-offs, fading from the sun, scratches, spots, etc.
It provides a deep shine to applied surfaces. Your car will always look as if it rolled out fresh from the car wash. It lasts up to 1 year.
- Water repellency
- High gloss
- Chemical resistance
- UV protection
- Easy to clean
Packaging | 50 mL |
Appearance | Colorless Liquid |
Chemical Resistance | 12>pH>1 |
Salt Water Resistance | Yes |
Moisture Resistance | Yes |
Pencil Hardness | (ISO-15184:2012) |
7H Dry Film Thickness | 200-300 nm |
Consumption per Unit Area | 5-8mL/m2 |
Density @23°C | 0.8g/cm3 |
pH Value | 4.8-5 |
Dry to Touch Time | 4h |
Application Temperature | 5°C-30°C (≤50% RH) |
Temperature Durability | 275°C |
Water Contact Angle | 97°@10 μL |
Water Contact Angle After “2000” Wet Scrub (ISO-11998:2006) | 89°@10 μL |
Water Sliding Angle | 25°@20 μL |
Oil Contact Angle | 76°@10 μL |
Gloss Rate @60° (ISO-2813:2014) | 93(Acrylic) |
Volatile Organic Compound (VOC) (ASTM D-2369) | 733g/L (91.6%) |
REACH Compliance | Yes |
- Surface should be prepared accordingly.
- Clean any flimsy layer of dust, dirt, oil or water.
- Apply under a shade away from direct sunlight.
- Spray the contents on a surface around 20-30 times for one square meter.
- Immediately buff the surface with a dry micro fiber cloth.
- Let it cure for 24 hours.
- Nasiol Metal Coat F2 50 ml
- 1 Soft Mirco - Fiber cloth
- 1 Bottle Trigger
Product Disclaimer
The technical information described herein is based on tests and other practical experience that Nasiol® believes are reliable. Nasiol® cannot guarantee anything but ready to use quality of the product at the time of shipment, disclaims any liability for product performance and incidental or consequential damages, according to self-implementation within the user’s knowledge, beyond the manufacturer’s control. Please refer to the Safety Data Sheet (SDS) before use of product. Users should consult Nasiol® for guidance on the suitability of specific applications. Nasiol® reserves the right to change the given data without further notice.